Industrial Technologies, Inc.
          800-875-1918

MP-3 Manual Post Puller and Accessories

     
The Model MP-3 weighs only 39.54 lbs (17.94 kg) and is easily operated by one man.
Step 1:   The Post Grabber is removed from its storage position and placed around the post. The puller is set with its base next to the post, the handle extended, and the hook removed from its carry position.

     
Step 2:   The chain is placed into the two position chain receiver – first notch for speed / second notch for power – then hooked to the Post Grabber.
     
Step 3:   The operator attaches the safety restraint to the chain, then pulls the post.
     
Step 4 :   After pulling the post, the MP-3 is returned to its carrying configuration. With the Post Grabber and chain locked in place, the MP-3 is ready to pull the next post.
   
                    
  220422   Chain Assembly is 45.25" (1.15 m) long, 3/8" (9.52 mm) Grade 80 Alloy Chain with 3.5 Ton (3.17 MT) Grab Hook and 3 Ton (2.72 MT) Swivel Hook Weighing 9.44 lbs (4.28 kg).
                   
  071040   Post Grabber with an Opening of 4-3/8" Wide x 2-1/2" Deep (111 mm x 63.5 mm) for the Post to be Pulled and a 1-1/2" (38.1 mm) Hook Eye Opening, Weighing 11.38 lbs (5.16 kg).
                   
  071041   Panel Post Grabber for Pulling 1-5/8" (41.3 mm) Line Posts Between Temporary Fence Panels. Weighing 2 lbs (0.9 kg).
                   
    *The Model MP-3, Part No. 071012, includes the Chain Assembly and Post Grabber
 
 
  View Our Post Driver Accessories  
     
  Download MP-3 Operating Instructions Download MP-3 Parts List
     
  Download MP-3 Fast Facts Download MP-3 Post Puller Literature